A foam insert cut to your tools.
Photograph your tools, arrange them online and we CNC-cut the insert in two-tone EVA. Pelican, Nanuk, Packout and toolbox drawers. No minimum order.
Watch the tour · under a minute- Price shown live
- 20 or 50 mm EVA
- Ships across Canada
- Proudly Canadian owned + operated
Photo in, insert out.
This is the real designer. It traces your tools from one photo, lays out the drawer, shows the insert in 3D and prices it while you work. Free, in your browser.
Your photo● Traced
Where you dropped them● Arranged
Lay your tools on our free printed sheet and take a photo. The designer straightens it, finds every outline and reads the true size from the corner marks.
Draw a pocket, drop in a circle, drag anything where you want it, turn it with the knob and pull a corner to resize. One key per tool, nothing to learn.
Edges snap to the tool's real outline, thick tools are corrected for the camera angle, and the AI names and checks every pocket. Tested on real tools in our own machine shop.
Auto-arrange packs the tools tight and square, front to back, with finger notches where you grab them. Or drag, line up and group them yourself.
Type the drawer's inside size and the sheet follows. Add a sheet for each drawer, move tools between them, and keep the whole toolbox in one file.
Tilt and turn the finished insert and see the coloured core show through every pocket, so you know exactly what arrives.
The price updates with every edit. Order the insert and we CNC-cut it in Richmond, BC, or buy the cutting files and cut it on your own machine.
From a phone photo to a finished insert.
- 01
Photograph your tools
Lay them on the printed tracing sheet and take one photo. The designer straightens it and traces every tool for you.
- 02
Arrange and set depths
Drag, turn, add finger notches, pick 20 or 50 mm foam and see the price change as you go.
- 03
Order it, or take the files
We cut it on our CNC router in Richmond, BC and ship across Canada. Or buy just the cutting files for C$10 a sheet.
Two-tone foam shows the bright core in every empty pocket, so a missing tool is obvious at a glance. Closed-cell, high-density EVA that shrugs off oil and coolant.
Simple pricing, no surprises.
Setup C$50 once per design, router time C$120/h, the foam at cost and C$10 packaging. The designer shows the exact price as you draw.
Start designingDXF with one layer per depth, layout PDF, true-scale print check and STL. Cut it on your own router.
Design, then buy the files| Size | 20 mm | 50 mm |
|---|---|---|
| 500 × 300 mm 1/12 sheet | C$80 | C$90 |
| 375 × 600 mm 1/8 sheet | C$100 | C$110 |
| 500 × 600 mm 1/6 sheet | C$120 | C$140 |
| 750 × 600 mm 1/4 sheet | C$140 | C$180 |
| 750 × 1200 mm 1/2 sheet | C$210 | C$290 |
| 1500 × 1200 mm Full sheet | C$300 | C$370 |
Prices in Canadian dollars, before tax and shipping. Pick up in Richmond, BC is free.
Good to know.
How do I get the outline of my tools into the designer?
Print the free tracing sheet, lay your tools on it and take a photo with your phone. The designer straightens the photo from the corner marks and traces each tool. You can also draw pockets by hand or import a DXF.
How much does a custom insert cost?
The designer shows the price as you draw: a one-time setup of C$50, router time at C$120 an hour, the foam at cost and C$10 packaging, never under C$60 an insert, before tax. Plain sheets start at C$80.
Can I just buy the cutting files and cut it myself?
Yes. For C$10 a sheet you get the DXF (one layer per depth), a layout PDF, a true-scale print check and an STL. The files open in Aspire, VCarve, Fusion and most CAM software.
Which cases and drawers does it fit?
Any of them. You set the sheet size to the inside of your Pelican, Nanuk, Storm or Packout case, or your toolbox drawer, in 20 mm or 50 mm foam. The biggest single sheet is 1.5 × 1.2 m.
How long does it take, and do you ship?
Most single inserts leave the shop within about a week of your order, two for larger jobs. Pick up in Richmond, BC, or we ship anywhere in Canada; the cart shows the rates before you pay.
Your tools, your layout, cut in Richmond.
Start in the designer, or send a photo of your tools on paper and we'll lay it out for you.